Daisy Wu
No power grid:
when the battery voltage reaches the low voltage,Pv and generator to charge the battery and power the loads,the max AC charging current up to 140A,so the charging speed is very fast. When the battery is fully charged,it supplies power to the load together.
Therefore, solar off grid energy storage systems are suitable for the following situations:
ldeal for areas with no power grid:If you live in an area without power grid,solar off-grid energy storage system are a great choice as you're generating your own electricity.
An off-grid inverter 230V is a specific type of inverter designed for off-grid energy systems to convert direct current (DC) from batteries or solar panels into alternating current (AC) with a standard output voltage of 230V, which is widely used in residential and commercial applications in regions with this voltage standard. It operates independently of the utility grid, enabling energy systems to function in remote locations or during power outages. These inverters typically feature advanced technologies like pure sine wave output to ensure compatibility with sensitive electronics, battery management systems to optimize charging and discharging, and smart monitoring capabilities for real-time performance tracking. They often include safety features such as overvoltage, undervoltage, short circuit, and over-temperature protection. An off-grid inverter 230V is ideal for powering household appliances, industrial equipment, and even entire buildings, making it a key component of reliable and sustainable off-grid energy solutions.
-
Built-in EMS management system -
THD<3% under standard load -
Multiple protection for safer use -
Switch time <8 m(to off grid mode)
-
Generator automatic start/stop function
Off-Grid System
Designed for areas without grid access or the grid is unstable, this system provides reliable power through energy storage and smart controls. It stores excess energy when available and switches to off-grid mode during outages, ensuring key devices stay operational. Ideal for remote locations or high-reliability power needs.
-
Technical Parameter
+HP-W Pure Sine Wave Inverterl Charger Inverter Output Model 1.0KW 1.5KW 2.0KW 3.0KW 4.0KW 5.0KW 6.0KW 8.0KW 10.0KW 12.0KW 15.0KW 18.0KW 20.0KW Continuous Output Power 1.0KW 1.5KW 2.0KW 3.0KW 4.0KW 5.0KW 6.0KW 8.0KW 10.0KW 12.0KW 15.0KW 18.0KW 20.0KW Surge Rating (20Secs) 3.0KW 4.5KW 6.0KW 9.0KW 12.0KW 15.0KW 18.0KW 24.0KW 30.0KW 36.0KW 45.0KW 54.0KW 60.0KW Output Waveform Pure Sine wave/Same as input(Bypass Mode) Max. Efficiency 92% Line Mode Efficiency >95% Power Factor 0.9-1.0 Nominal Output Voltage 100-110-120Vac/220-230-240Vac Output Voltage Regulation ±10%RMS Output Frequency 50Hz±0.3Hz/60Hz±0.3Hz Short Circuit Protection Yes(1 sec after fault) Typical transfer Time 10ms(Max) THD <3%(Rated battery level,rated full linear load) DC Input Nominal Input Voltage 12.0Vdc/24.0Vdc 12.0Vdc/24.0Vdc/48.0Vdc 24.0Vdc
48.0Vdc24.0Vdc/48.0Vdc/96.0Vdc 48.0Vdc/96.0Vdc Minimum Start Voltage 10.0Vdc/10.5Vdc for 12Vdc Mode *2 for 24Vdc/*4 for 48Vdc/*8 for 96Vdc, Low Battery Alarm 10.5Vdc/11.0Vdc for 12Vdc Mode Low Batteiy Trip 10.0Vdc 10.5Vdc for 12Vdc Mode High Voltage Alarm 16.0Vdc for12Vdc Mode Low Battery Voltage Recover 15.5Vdc for 12Vdc Mode ldle Consumption-Search Mode <25W When Power Saver On Charger Output Voltage Depends on battery type Charger Breaker Rating 20A 20A 20A 25A 32A 40A 40A 50A 80A 80A 100A Battery Initial Voltage for start 10-15.7Vdc for 12Vdc Mode *2 for 24Vdc,4 for 48Vdc/*8 for 96Vdc, Over Charge Protection S.D 15.7Vdc for 12Vdc Mode Selector Switch Setting Description Fast Mode/VDC Float Mode/VDC 0 Charger Off 1 Gel USA 14.0 13.7 2 AGM 1 14.1 13.4 3 Lithium 13.8 13.6 4 Sealed Lead Acid 14.4 13.6 5 Gel EURO 14.4 13.8 6 Open Lead Acid 14.8 13.8 7 LifePO4 14.0 13.8 8 De-sulphation 15.5(4 Hours then Off) 9 Classic LFP 13.6 13.5 For 12Vdc Mode Series(*2 for 24Vdc Mode/*4 for 48Vdc Mode/*8 for 96Vdc Mode) BTS Battery Temperature Sensor
(Optional)Yes(Refer to the table)Variances in Charging Voltage & S.D Voltage Base on the Battery Temperature. Bypass & Protection Input Voltage Waveform Sine wave (Grid or Generaton) Nominal Voltage 100-110-120Vac/220-230-240Vac Max Input AC Voltage 150Vac For 120Vac LV Mode;300Vac For 230Vac HV Mode Nominal Input Frequency 50Hz or 60Hz Low Freq Trip 47±0.3Hz for 50Hz 57±0.3Hz for 60Hz High Freq Tip 55±0.3Hz for 50Hz.65+0.3Hz for 60Hz Over Load Protection (SMPS load) Circuit Breaker Output Short Circuit Protection Circuit Breaker By pass Breaker Rating 20A 20A 20A 25A 32A 40A 40A 50A 80A 80A 100A Transfer SWitch Rating 30AmpforUL&TUV 40Ampfor UL 80Amp for UL 100Amp forUL Bypass Without Battery
ConnectedYes (Optional) Max Bypass Current 30Amp 40Amp 80Amp 100 Amp Mechanical Specifications Mounting Wall Mount Inverter Dimensions (L*W*H) 388*415*200mm 390*192*567mm 400*192*675mm 415*213*706mm Display Status LEDs /Status LEDs+LCD Standard Warranty 1 Year
