Daisy Wu
01020304
The maximum power point tracking technology increases the efficiency by 25%~30%. The overall efficiency can reach 98%. Optimize battery performance by three stage charging. The maximum charging current can reach 60A. Battery temperature sensor (BTS) automatically provides temperature compensation, supports multiple batteries, and automatically detects battery voltage.
-
Built-in EMS management system -
THD<3% under standard load -
Multiple protection for safer use -
Switch time <8 m(to off grid mode)
-
Generator automatic start/stop function
-
Technical Parameter
+MPPT Solar Charge & Discharge Controller MODEL 3KW Charging Set points Absorption Stage Float Stage Nominal System Voltage 12,24,or 48 VDC (Auto detection) Flooded Battery 14.6/29.2/58.4Vdc 13.5/27/54Vdc Maximum Battery Current 60 Amps AGM/Gel Battery (Default) 14.1/28.2/56.4Vdc 13.5/27/54Vdc Maximum Solar Input Voltage 145Vdc Over-charging voltage 15Vdc/30Vdc/60Vdc PV Array MPPT Voltage Range (Bat.Voltage+5)~115Vdc Overcharging comeback
voltage14.5Vdc/29Vdc/58Vdc Maximum InputPower 12 Volt-800 Watts
24 Volt--1600 Watts
48 Volt-3200 WattsBattery defect voltage 8.5Vdc/17Vdc/34Vdc Transient Surge Protection 4500 Watts /port Battery defect comeback
voltage9Vdc /18Vdc/36Vdc Temperature compensation coefficient Volt-5 mV/℃lcell
(25℃ ref.)Mechanical and Environment Product size (W*H*D mm) 322*173*118 Temperature compensation 0℃ to +50℃ Productweight (Kg) 4.8 Charging stages Bulk,Absorption,Foat Enclosure IP31 (indoor & vented)
0102