Daisy Wu
Three-phase pure sine wave inverter/chargers are widely used across diverse sectors:
1.Industrial Facilities:
Powers heavy machinery and equipment that require stable three-phase power.
2.Renewable Energy Systems:
Integrates with solar or wind power systems to store and manage renewable energy efficiently.
3.Commercial Buildings:
Supports HVAC systems, lighting, and other critical loads.
4.Off-Grid and Backup Power Systems:
Provides reliable energy storage and conversion in remote locations or during power outages.
-
THD<3% under standard load -
Multiple protection for safer use -
Switch time <8 m(to off grid mode)
-
Generator automatic start/stop function
Basic application
The system can use PV energy to power loads when grid is unavailable, minimizing the use of generator. Excessed PV energy can be stored in batteries and provide backup power during outages. Compensating with a generator to avoid power shortage issue.
Backup power scheme
It can be used as a stable and reliable backup power source, using photovoltaic energy to charge the batteries and seamlessly switching to standby mode in milliseconds to power critical equipment in the event of a grid failure. Coupled with a generator, it is possible to increase the amount of time spent off-grid at night.
-
Technical Parameter
+TP-3 Series Off Grid Three Phase Hybrid Inverter Charger Inverter
OutputModel 36KW Continuous Output Power 36000W Surge Rating(20s) 108000W Capable of Starting Electric Motor 36HP Unbalance Load Acceptable 100% DC Input Voltage 48Vdc Output Waveform Pure Sine wave/Same as input (Bypass mode) Nominal Efficiency 89% (Peak) Line Mode Efficiency >95% Power Factor 0.9-1.0 Connection Mode 3-phase 4-wire system+Grid Output Voltage Rating 400V Output Phase Voltage 230Vac Output Voltage Regulation ±10% RMS Output Frequency 50/60Hz ± 0.3Hz Short Circuit Protection Yes, current limit function (Fault after 60ms) Typical Transfer Time Typical 6~8ms,10ms (Max) THD <3% linear load DC Input Nominal Input Voltage 48Vdc Min. Start Voltage 42Vdc / 44Vdc Low Battery Alarm 42Vdc / 44Vdc Low Battery Trip 40Vdc / 42Vdc High Voltage Alarm & Fault 64Vdc High DC Input Recovery 62Vdc Low Battery Voltage Recover 52Vdc Idle Consumption-Search Mode < 100W(When power saver on) Charge Input Voltage Range Narrow: 96~132Vac/ 184~253Vac ; Wide:70~135Vac / 140~270Vac Input Frequency Range Narrow: 47-55±0.3Hz for 50Hz,57-65±0.3Hz for 60Hz
Wide: 40-70±0.3Hz for 50Hz/60HzOutput Voltage Same as input Charger Breaker Rating(230Vac) 60A Charger Breaker Rating(120Vac) /
